8-Output Module

The device has 8 relay outputs that can be remotely controlled via MODBUS RTU. When a relay is activated, it outputs the voltage connected to the COM terminal, and the corresponding output LED lights up. Loads up to 5 Amperes can be driven directly from the relay output. If the current drawn exceeds 5 Amperes, it is necessary to control the load via a contactor. In this case, the relay output is used as the trigger signal for the contactor.

8-INPUT MODULE

This device is designed to remotely monitor the status of 8 dry contact inputs using MODBUS RTU. One end of the dry contact to be monitored is connected to the COM terminal, and the other end is connected to any of the inputs I1-I8 for monitoring. The corresponding LED is off when the contact is open, and on when the contact is closed.

HEAT-LIGHT METER

MODBUS RTU is used to remotely measure environmental variables such as temperature and light intensity.

ANALOG INPUT MODULE

Analog sensor data, which provides 0-10V DC and 4-20mA DC output via the Analog Input Module, can be read via the RS-485 line using the Modbus RTU protocol.

PALS SAYICI

It simultaneously counts and records 6 counters with pulse output via input. Data can be read and processed via RS-485 using the Modbus RTU protocol. Time-based counting operations can be performed using the built-in clock chip.