A multimeter is a device used to perform multiple electrical measurements, including voltage, current, and resistance. It can also be used for measurements such as checking for short circuits.

While an ammeter measures current, a voltmeter measures voltage, and an ohmmeter measures resistance, a multimeter can perform all three measurements.

General Features of Grup Arge Multimeter Models

The multimeter measures and calculates current and voltage values ​​for 3 phases in True RMS format. Along with these quantities, it also measures frequency and displays the measured values ​​on the screen. Optionally, it can also measure and display ground voltage.

Current transformer and voltage transformer settings can be adjusted via the menu.

In versions with output capability, it can provide output according to the current and voltage value ranges set via the menu. Thanks to its new power supply design, the multimeter does not require a separate power input. The device can operate as long as there is power in any voltage phase (85-265 Volts).

Technical Specifications of Grup Arge Multimeter Models

• It is microprocessor-based.
• The operating temperature of the device should be between -10 °C and +55 °C.
• The power consumption of the measurement inputs is less than 1 VA.
• It has an IP20 protection rating.
• The phase-to-phase line voltage can be adjusted within the range of 190-36200 V.
• The phase-to-phase measurement voltage can be adjusted within the range of 100-480 V AC (45-65 Hz), while the phase-to-neutral measurement voltage can be adjusted within the range of 10-280 V AC (45-65 Hz).
• The current transformer ratio can be adjusted between 5/5 and 10000/5.
• Optionally, it can be compatible with the CT30 type current transformer.
• There are three modes for adjusting the polarity of current transformers: automatic, manual, and reverse.
• The operating frequency is 50 Hz.
• The minimum measurement value is 25mA 10V.
• The measurement accuracy is 1%.
• It is capable of measuring phase-to-phase and phase-to-neutral voltages, current, frequency, and ground voltage for all three phases.
• Power consumption: The relay output version consumes 4-8.5 VA, while the standard version consumes 3-7 VA.
• It can optionally have 2 x 5A relay outputs.
• There are 3 four-digit, seven-segment displays available.
• The device dimensions (Length x Width x Depth) are 97.5 x 97.5 x 47 mm.
• It operates under a voltage of 85-265 V AC.
• Our product, named Multimeter, features current, voltage (phase-to-phase), voltage (phase-to-neutral), frequency, control outputs, menu, and k (x1000) LEDs.